The transition to USB-C is complete

By martinm june 26,2026.

Announced a little over two years ago, the transition to USB-C connectivity for all Yoctopuce modules is now officially complete. This is a good opportunity to take stock and explain how we see the future. If you still absolutely need modules with Micro-B connectors, reading this post carefully will likely put your mind at ease.

A new autoplacer robot

By mvuilleu, in Electronics, june 19,2026.

After 15 years of loyal service, our first autoplacer robot is reaching the end of its life. It's still working well, but given the difficulty in sourcing replacement parts, the manufacturer informed us this Spring that its support contract would end at the end of the year. So we had to break open our piggy bank to upgrade this key piece of equipment in our production process...

Monitoring a parking space with Home Assistant

By seb june 12,2026.

This week, we'll look at how to set up a parking space occupancy sensor in Home Assistant. To do this, we'll use a Yocto-RangeFinder.

New: Yocto-RFID-15693-C and Yocto-MaxiDisplay-C

By martinm, in New stuff, june 06,2026.

This week, Yoctopuce is announcing the last two modules to be upgraded to USB-C connectivity: the Yocto-RFID-15693-C and the Yocto-MaxiDisplay-C. Let's take a closer look...

Improvements to VirtualHub (for Web)

By mvuilleu, in New stuff, may 29,2026.

This week, we are releasing an update to VirtualHub (for Web), our tool for remotely monitoring a system based on Yoctopuce modules. We've made a few improvements to it. Let's see what they are...