Testing the SenseCap S700 V2 weather station

By Tiago, in Reviews, Measures and Internet of Things, june 28,2024.

A few weeks ago, we presented the Yocto-SDI12 which communicates with SDI-12 sensors. Today, we're going to use the Yocto-SDI12 to retrieve measures from Seed Studio's integrated SenseCAP S700 V2 weather station and display them using Yocto-Visualization for Web.

Integrating remote sensors in Home Assistant

By mvuilleu, in Internet of Things, october 27,2023.

We've already shown you how to integrate Yoctopuce sensors in Home Assistant, by configuring a Yoctopuce hub to exchange data with an MQTT broker on the local network. But how do you go about integrating in Home Assistant sensors installed in another site without access to the local network, or even in the middle of nowhere with only a GSM connection?

Using Yocto-Visualization (for Web) with a YoctoHub-GSM

By mvuilleu, in Measures and Internet of Things, october 06,2023.

Our free VirtualHub (for Web) tool lets you collect measures taken in the middle of nowhere with a YoctoHub-GSM-4G. By adding Yocto-Visualization (for Web), you can easily obtain a web interface for viewing measure graphs in real time. This week, we'll give you a few tips on how to get great results with this configuration, while minimizing the energy consumed by the YoctoHub-GSM-4G.

Controlling an IntelliFlo pump from Home Assistant

By mvuilleu, in Measures and Internet of Things, july 07,2023.

A few weeks ago, we shared with you the first steps in integrating an existing pool control system into Home Assistant. This post follows up on that project, with the replacement of the old fixed-speed pump with an IntelliFlo Whisterflo VSF variable-speed pump, which we control using a Yocto-RS485-V2.

Pool control with Home Assistant

By mvuilleu, in Internet of Things and Measures, may 26,2023.

As Yoctopuce modules can now be controlled by MQTT, we propose this week a concrete example of their use in a system entirely controlled by Home Assistant. The goal of this project is to obtain a control panel gathering all the important parameters to check the state of a private pool, and to implement some simple regulation automations that can then be easily refined to optimize the pool energy consumption.