Yocto-servo

Yocto-Servo

  

The Yocto-Servo device lets your software drive up to 5 RC servo-motors through a standard USB interface.

This device handles two power sources for the servo-motors. For low-power applications, the servo-motors can be powered directly from the USB bus. For higher loads, use the external power connection provided on the device. The switch from one power source to the other is automatic, but can be controlled by software.

This device can be connected directly to an Ethernet network using a YoctoHub-Ethernet, to a WiFi network using a YoctoHub-Wireless-n and to a GSM network using a YoctoHub-GSM.

Yocto-Servo Yocto-Servo Yocto-Servo

USB cables and enclosures to be ordered separately.

CHF 23.59

   Add to cart

Specifications1

Hardware release:Rev. B
Product ID:SERVORC1
Product name:Yocto-Servo
USB connector:micro-B
Width:20mm
Length:45mm
Weight:5g
Channels:5
Protection class, according to IEC 61140:class III
Normal operating temperature:5...40░C
Extended operating temperature2:-30...85░C
Supported Operating Systems:Windows (PC + IoT), Linux (Intel + ARM), macOS, Android
Drivers:Driverless, no driver needed
API / SDK / Libraries:C++ Obj-C C# VB.NET UWP Delphi Python Java Android LabVIEW
API / SDK / Libraries (TCP only):Javascript Node.js PHP
RoHS compliance:RoHS II (2011/65/UE)
Suggested enclosure:YoctoBox-Short-Thick-Black
Harmonized tariff code:9032.9000
Made in:Switzerland


1 These specifications are for the current hardware revision. Specifications for earlier revisions may differ.
2 The extended temperature range is defined based on components specifications and has been tested during a limited duration (1h). When using the device in harsh environments for a long period of time, we strongly advise to run extensive tests before going to production.

Accessories and related products

YoctoBox-Short-Thick-Black, Enclosure for Yoctopuce device (short, thick, black)Micro-USB-Hub-V2, Micro USB hub (multi-TT) with solder pads, for DIY usePowerSocket, Screw connector socketFix-2.5mm, screws and spacersUSB-A-MicroB-50, USB 2.0 type A to Micro-B data cable, 50 cm

Related articles and application examples

Downloads

User manual (HTML)
User manual (PDF)
Product brief
Blueprints
3D file (STEP)
RoHS certificate
Most recent firmware45886 (08/08/2021)
Programming libraries45664 (06/29/2021)
Command line API45975 (08/13/2021)
VirtualHub application47219 (11/11/2021)


Add a comment 2 comments


1 - lexingtonian Sunday,december 13,2020 19H53

I see where the YoctoServo is supported in Artisan-Scope -
https://artisan-scope.org/devices/yoctopuce/

I'm attempting to get Artisan-Scope to see/move an RC Servo (works in VirtualHub) and cant figure out how to address the YoctoServo with Artisan-Scope using the RC Command API used in Artisan Events.

This post has more info -

https://www.home-barista.com/roasting/artisan-scope-and-yoctopuce-yoctoservo-not-found-t69774.html#p762356

Any assistance would be appreciated. Thank you!

2 - lexingtonian Monday,december 14,2020 15H06

With some kind help from an Artisan Engineer I was able to figure it out. The post above has the details and I hope it helps someone!

Yoctopuce, get your stuff connected.