A few months ago we announced a new open-source tool called Gateway Hub, to help you deal with interactive remote access to YoctoHubs behind a NAT firewall. This free tool is now becoming even more useful, with the addition of support for forwarding HTTP, MQTT and WebSocket callbacks to third-party services.
This week, we are proud to present two new Yoctopuce modules on which we have been working for a long time: the Yocto-Bridge and the Yocto-MaxiBridge. They enable you to easily interface Wheatstone bridges... that is, you can build you own USB scale or weighing machine. Let's see what it's all about.
Today we present a new tool which you'll find very useful if you use Yoctopuce modules in a protected network environment, such as behind a NAT filter or a firewall. If you have ever wished to remotely connect to your devices for an interactive session, for instance to modify the configuration, you will be glad to know that this is now possible... even for YoctoHub-GSM!
In a previous post, we showed the effects of magnetic and gyroscopic perturbations on the inertial sensor of the Yocto-3D-V2. The standard method used for sensor data fusion could in some cases find itself undermined, to the point of making the measures useless. Therefore, we recently added in the Yocto-3D-V2 firmware the possibility to choose between several fusion methods, in order to enlarge the application range where this product can be used.
Following various requests from customers, we recently added some improvements to the Yocto-PWM-Rx. If you use this module, you may be interested to know more than the few words you have perhaps already found in the release note of the firmware list. So here are a few explanations...
1 ... 5 6 7 8 9 10 11 12 13 14 15 ... 20 ... 23