The Yocto-MaxiThermistor is a USB interface for NTC and PTC thermistors. It can measure up to six temperature points. Each of the six channels can be configured independently thanks to tables or reference temperatures and β coefficients. The Yocto-MaxiThermistor is an isolated device: there is an electric isolation between the sensor part and the USB part.
The Yocto-MaxiThermistor is shipped with six tiny NTC thermistors connected to a 10 centimeter wire. You can extend them with any regular electric wire.
The six channel terminal block allows the use of 30-18 AWG wire. If you need to use bigger wire, choose the Yocto-Thermistor-C.
The Yocto-MaxiThermistor can also be used as a multichannel ohm-meter.
This device can be connected directly to an Ethernet network using a YoctoHub-Ethernet, to a WiFi network using a YoctoHub-Wireless-n and to a GSM network using a YoctoHub-GSM.
USB cables and enclosures to be ordered separately.
Specifications1
Hardware release:Rev. B
Product ID:THRMSTR2
Product name:Yocto-MaxiThermistor
USB connector:micro-B
Width:58mm
Length:50mm
Weight:14g
Channels:6
Refresh rate:1Hz
Measuring range:100Ω...500KΩ
Accuracy (Ω) between 1KΩ...10KΩ:~0.1%
Accuracy, typical (Ω):1%
Protection class, according to IEC 61140:class III
USB isolation, dielectric strength:1.5kV
Normal operating temperature:5...40°C
Extended operating temperature2:-30...85°C
Supported Operating Systems:Windows (PC + IoT), Linux (Intel + ARM), macOS, Android
Drivers:Driverless, no driver needed
API / SDK / Libraries:C++ Obj-C C# VB.NET UWP Delphi Python Java Android LabVIEW
API / SDK / Libraries (TCP only):Javascript Node.js PHP
RoHS compliance:RoHS III (2011/65/UE+2015/863)
Suggested enclosure:YoctoBox-MaxiIO-Transp
Harmonized tariff code:9032.9000
Made in:Switzerland
Accessories and related products
Related articles and application examples
Downloads
