Your own USB weather station: the Yocto-Meteo device will let you measure via USB the current humidity, pressure, and temperature, as well as record the pressure, ambient temperature and humidity on its internal flash for later retrieval when connected again by USB (built-in data logger). This product is the ideal to build your own DIY weather station, and to monitor the weather conditions in your garden.
This meter circuit has been designed so that the sensor itself can be moved further away from the USB connector by a few meters: simply split the board into two parts and solder a 4-wire cable on the designated pads.
Note: earlier versions of this product were less accurate; for details, refer to the manual.
This device can be connected directly to an Ethernet network using a YoctoHub-Ethernet, to a WiFi network using a YoctoHub-Wireless-g, it can even be connected to a GSM network thanks to the YoctoHub-GSM.
USB cables and enclosure to be ordered separately.
C'est pas dommage qu'il n'y ait pas une entrée pour une éolienne vitesse/direction?
C'est trop dépendant du modèle d'éolienne utilisé. Par contre il n'est pas exclu que l'on fasse un jour un module compte-tours, à charge de l'utilisateur de l'adapter à son éolienne.
I'm on the market for a server room monitoring system and I came across your website.
I think your products are great, but since I have no experience in programming, I would like to know if there's any commercial application for os x or iOS based on your hardware.
We are not aware of any publicly available OS X/iOS commercial application using our modules. However our libraries are provided with a few useful pre-compiled examples. If you have specific needs, just send a mail to Yoctopuce support, our software department might be able to help.
i just find your fantastic products and have questions.
Can i connect this weather station with yoctohub-ethernet (and how much max. length of UTP cable can be)?
And is there template of weather station for cacti monitoring system? if not, can your application export automatic in txt file results (to grab for cacti)?
Thank you for answers!
Hi, Yes the Yocto-Meteo will be compatible with the Yoctohub-Ethernet, the maximum cable length should be standard (around 100m for a CAT 5 cable).
Regarding Cacti monitoring system, tunneling data from the Yocto-Meteo to Cacti should be a formality: Cacti provides PHP based data gathering scripts, and our devices can be driven with PHP. This even looks looks like a good subject for a post in our blog, stay tuned :-)
thank you for answer martinm.
and last question, can yoctohub-ethernet get power for himself and yocto-meteo over POE (if yes, what is the voltage)?
Yes, the Yoctohub-Ethernet will support POE and will be able to power the Yocto-devices connected to it, Yocto-Meteo included. All our devices require 5 volts to work when powered directly from USB socket. The POE input will follow IEEE802.3af and accept from 37V to 55V (either in mode A or mode B).
We don't know of an Apple application for server room monitoring, however Valarm provides an Android ( often cheaper devices than Apple! ) solution for server room monitoring. With Valarm you can connect an economical device to the Yocto-Temperature and get SMS and/or email alerts when the temperature goes out of a specified range. Valarm ( the Versatile Asset Locator And Remote Monitor ) has also implemented other functionalities ( such as asset & fleet tracking ) and is adding more and more support for various sensors. See http://www.valarm.net for full details.
The Valarm app is available directly at https://play.google.com/store/apps/details?id=net.valarm.android.pro
If you have any other comments or questions don't hesitate to ask!
can i connect a Bluetooth module to the Meteo device to transfer realtime data to a phone, tablet or desktop computer ?
if yes, any specific bt module ?
how much current does this module draw when logging, and how tight is the 5V specification?
Would it be feasible to power this for logging purposes from a 4x1.5V household battery pack?
I haver never heard of an USB-over-bluetooth adapter. USB-over-WiFi exists and works however.
The CPU and sensors for the Yocto-Meteo are all behind 3.3V regulator, so as long as input voltage is above 3.6V you should have no problem. The module uses approx 25mA, so if you use 2500mAh batteries, you can hope to run for around 4 days. But we have never tried it :-)
@mvuilleu Ah, that's too much current draw for long-term logging on batteries... I could use a USB power supply, but need to preserve the timestamps through short power cuts, and while the USB cable is changed over. Hmmm, perhaps a supercap could be added?
@lino There is still hope: we work on a new USB timer device that will let you automatically power on and off a device (or low-power computer) based on a schedule. That timer will be able to run from batteries, consuming almost no current at all while sleeping.
I don't think that would fit my use case.... I do have mains power at the typical logging locations, the issue is that I need the time stamps to be correct. A supercap could bridge short power interruptions, and also the time it takes to change over the USB cable from laptop/smartphone (reading out data on a maintenance visit) to a power supply. (For the latter I could also use a powered USB hub or a Y-cable, but I want to make things as idiot-proof as possible out in the field.)
@lino: if you need at least 300 Yocto-meteo able a keep time when unplugged, just contact support, we could probably build customized versions.
Is there a way this could be powered by a solar power cell?
I'd love to see wireless communication as well..
In other words I want a virtually permanent continuous logging weather station. :)
@tobiasv: actually we are working on a Wifi version of the Yocto-Meteo. We are also working on a Wifi Hub for our devices (see: www.yoctopuce.com/EN/products/vaporware/yoctohub-wireless). These will have an electic consumption small enough to be battery / solar powered.
Hi, can the meteo be used to detect water leak as part of a DC environmental monitoring? If yes, then how does it avoid itself being disabled by the water itself? Or is there is there a wire probe? Thanks.
@clickndeploy: The Yocto-Meteo is meant to measure humitity in the air, not liquid water.
Hello. I've just found out your products and I'm really interested on it. I have one doubt, though: are these modules CE certified?
@lmha As of today, we can sell our products without CE mark since we are not in EU, but we are in the process of creating all documentation necessary to certify them anyway. Products like the Yocto-Meteo have already been verified to be compliant with requirements (see http://www.yoctopuce.com/EN/article/electromagnetic-compatibility-tests ). Don't hesitate to contact support by mail if you want more details on where we stand for CE compatibility for specific products.
I have three of your "meteo" and they work great! However our university research team is working on a project that might use your station but ... some modifications might be required. How can I contact you to discuss possible options?
@tetaran: sure we can make customized version of any of our products. First read this post:
Then contact yoctopuce support.
I'm after some clarification on the extended operating temperatures. Is the device likely to withstand cycling through temperatures from -5 to 80deg for approximately 10hrs? Would this be possible in conjunction with varying humidity from 0 to 100%?
@doug Sorry for the lack of explanation in the documentation, we are right now in the process of updating all docs with more details on this topic. The extended operating temperature range has been determined based on components manufacturer recommendations, and on controlled environment tests performed during a limited duration (1h). In your case, the only problem I foresee is in case you produce condensing humidity, which could cause electric shortcuts. You should get an SF2 filter cap to put on the SHT25 sensor to help with that one, but you may have to spray some conformal coating on the electronics (or use epoxy).
Regarding the precision, have a look at the datasheet of the SHT25 to see the cross-impact of extreme temperature and humidity on each other: https://www.sensirion.com/fileadmin/user_upload/customers/sensirion/Dokumente/2_Humidity_Sensors/Sensirion_Humidity_Sensors_SHT25_Datasheet.pdf