if you need to connect more Yoctopuce modules than allowed on our network hubs, you can add this extension board to them. Connected on the network hub with a picoflex ribbon cable (included), it will allow you to connect 4 additional Yoctopuce modules to the network. There is no need for a separate power supply cable, as the shield is powered directly through the picoflex ribbon cable.
The Yoctopuce modules can be connected to this shield using USB-OTG-MicroB-MicroB-20 cables, or using the more compact 1.27-1.27-11 cables (which require soldering). It is even possible to mount the devices directly on the shield (two on each side), and to connect them using Board2Board-127 connectors.
Warning: although the 4 downstream ports hosting Yoctopuce devices use USB micro-B connectors, the YoctoHub-Shield use a specific protocol simpler than USB to talk to the devices. Therefore, it is not possible to drive or even to power a regular (non-Yoctopuce) device using the YoctoHub-Shield. It is not possible neither to use a regular USB hub (such as the Micro-USB-Hub) on the downstream ports. However, if you need even more downstream ports for Yoctopuce devices, you can daisy-chain multiple YoctoHub-Shield.
USB cables and enclosures to be ordered separately.