Yocto-maximicrovolt-rx

Yocto-MaxiMicroVolt-Rx

   

The Yocto-MaxiMicroVolt-Rx is a precision analog/digital converter to perform high-precision differential voltage measurements. The device provides 4 differential inputs, which are measured in round-robin loop. It provides a regulated 4.7V power supply. The inputs are not electrically isolated from the USB ground, but the inputs can freely float between the ground and the 4.7V supply: only the voltage difference between the two wires of each pair will impact the measured value.

The measure is performed by a 32 bit A/D with FIR filter, which allows for a sensitivity better than 1 uV, combined with a precision voltage reference. The device includes a built-in temperature sensor, which can be internal or external NTC, and can perform autonomous computations on the measures values and temperature. This makes it ideal to measure the output signal from electrochemical gas sensors for instance.

The device provides immediate reading on USB, and can also store measures on the device internal flash for later retrieval when connected again by USB.

This device can be connected directly to an Ethernet network using a YoctoHub-Ethernet, to a WiFi network using a YoctoHub-Wireless-n and to a GSM network using a YoctoHub-GSM.

Yocto-MaxiMicroVolt-Rx Yocto-MaxiMicroVolt-Rx

USB cables and enclosures to be ordered separately.

CHF 125.40

   Add to cart

Specifications1

Hardware release:Rev. B
Product ID:RXUVOLT1
Product name:Yocto-MaxiMicroVolt-Rx
USB connector:micro-B
Width:58.3mm
Length:50mm
Weight:15g
Channels:4
Chipset:Texas ADS1263, REF3425
Refresh rate:2 or 7Hz
Input impedance:40MΩ
Measuring range:-2000...+2000mV
Accuracy:1 uV, 0.05%
Sensitivity:0.5uV
Protection class, according to IEC 61140:class III
Normal operating temperature:5...40°C
Extended operating temperature2:-30...85°C
Supported Operating Systems:Windows (PC + IoT), Linux (Intel + ARM), macOS, Android
Drivers:Driverless, no driver needed
API / SDK / Libraries:C++ Obj-C C# VB.NET UWP Delphi Python Java Android LabVIEW
API / SDK / Libraries (TCP only):Javascript Node.js PHP
RoHS compliance:RoHS III (2011/65/UE+2015/863)
Suggested enclosure:YoctoBox-MaxiIO-Transp
Harmonized tariff code:9032.9000
Cables and enclosures:available separately
Made in:Switzerland


1 These specifications are for the current hardware revision. Specifications for earlier revisions may differ.
2 The extended temperature range is defined based on components specifications and has been tested during a limited duration (1h). When using the device in harsh environments for a long period of time, we strongly advise to run extensive tests before going to production.

Accessories and related products

YoctoBox-MaxiIO-Transp, Clear plastic enclosure for the Yocto-Maxi-IOUSB-A-MicroB-50, USB 2.0 type A to Micro-B data cable, 50 cmYoctoHub-Ethernet, Ethernet-enabled hub for Yoctopuce modules

Related articles and application examples

Downloads

User manual (HTML)
User manual (PDF)
Product brief
Blueprints
3D file (STEP)
RoHS certificate
Most recent firmware54545 (05/12/2023)
Programming libraries62875 (10/09/2024)
Command line API62875 (10/09/2024)
VirtualHub application62388 (09/01/2024)


Add a comment No comment yet


Yoctopuce, get your stuff connected.