The Yocto-0-10V-Rx device lets you read via USB the instant value returned by any industrial sensor following the 0-10V standard, as well as record the measures on its internal flash for later retrieval when connected again by USB. The device can automatically map the current reading to a physical measure by applying a proportional rule. The module features two inputs, to connect two independent sensors.
The Yocto-0-10V-Rx can provide up to 80mA to power sensors that do not require too much power. The supply voltage is regulated 23V, isolated from the USB bus but common to both inputs.
This device can be connected directly to an Ethernet network using a YoctoHub-Ethernet, to a WiFi network using a YoctoHub-Wireless-n and to a GSM network using a YoctoHub-GSM.
USB cables and enclosures to be ordered separately.
I thought it would be straightforward to connect to the device via python (which I use for plotting etc), however, cannot appear to get helloworld.py to function? The device works fine in VirtualHub.
@rab wilson: Well, it is supposed to be straightforward. I suggest that you read that article first:
then contact Yoctopuce support directly.