Yocto-Box : family portrait

Yocto-Box : family portrait

Great news! the whole range of Yocto-Devices enclosures is now available on our shop. It's probably time for a recap on those enclosure specs, so you can choose the one that fits your need.


 Family portrait
Family portrait



All enclosures are made of one base and one lid, tied together with screws and captive nuts. All screws are Allen, M2.5 size. The matching tool is included in the kit

Enclosures parts are tied using screws
Enclosures parts are tied using screws

.

Lids comes in two heights. As a general rule, all devices with a terminal block requires a thick lid, the other ones can use a thin one.

Enclosures parts comes in two heights
Enclosures parts comes in two heights



All lids are clear, some have extra vents allowing a better interaction between the device and the environment (Yocto-Meteo) and/or a better heat management (Yocto-Amp).

Some lids have extra vents
Some lids have extra vents



Regular lids have a Yoctopuce logo engraved on top, but starting with 9 enclosures ordered at the same time, we can engrave the logo of your choice, for free. Contact us for more details.

The logo on the lid can be customized
The logo on the lid can be customized



Bases come in 3 lengths: long, short and very short. This combined with the lids allow to build five enclosure sizes. Five, not six, because there is no Very-Short-And-Thick enclosure.

The bases come in 3 sizes.
The bases come in 3 sizes.



The bases can be black or translucent. They have fixing clamps, but those can be removed if needed.

The bases can be black or translucent
The bases can be black or translucent



Fixing clamps can be removed
Fixing clamps can be removed



The bases also have embedded magnets allowing to make them stick on ferromagnetic materials. Because theses magnets uses a patented technology, we are not allowed to export those to United-States, Canada and Japan. Therefore, enclosures exported to these countries do not have magnets.

Bases have embedded magnets
Bases have embedded magnets



An adhesive is provided in the kit, so you can make them stick on any smooth surface.

Bases can be self-adhesive.
Bases can be self-adhesive.



We also have something special for the sensor break-outs. Very small enclosures will allow you install those sensor parts anywhere you want. Please note: Picoflex connectors will not fit in those sensor enclosures, you will have to use your solder iron for the wiring.

Sensor breakout also have their own enclosure
Sensor breakout also have their own enclosure



On our online shop, each device have the best fitting enclosure listed in the "Accessories" section. There are some exceptions though: there is no enclosure fitting the Yocto-PowerColor and the Yocto-Color. But if you break those apart, the USB part will then fit in a short enclosure and the Yocto-Color Leds can be placed in a sensor enclosure.

The Yocto-Color does not fit in a enclosure, but the parts can.
The Yocto-Color does not fit in a enclosure, but the parts can.




Right now there is no enclosure available for double-width modules such as the Yocto-MaxiRelay or the to be available YoctoHub-Ethernet. But we are working on it.

Add a comment No comment yet Back to blog












Yoctopuce, get your stuff connected.