The Yocto-0-10V-Rx-C device lets you read via USB the instant value returned by any industrial sensor following the 0-10V standard, as well as record the measures on its internal flash for later retrieval when connected again by USB. The device can automatically map the current reading to a physical measure by applying a proportional rule. The module features two inputs, to connect two independent sensors.
The Yocto-0-10V-Rx-C can provide up to 80mA to power sensors that do not require too much power. The supply voltage is regulated 23V, isolated from the USB bus but common to both inputs.
This module is the equivalent of the Yocto-0-10V-Rx, but with a USB type-C connector. Both versions can be connected to a USB A, Type C or Micro-B host with the appropriate cable.
This device can be connected directly to an Ethernet network using a YoctoHub-Ethernet, to a WiFi network using a YoctoHub-Wireless-n and to a GSM network using a YoctoHub-GSM.
USB cables and enclosures to be ordered separately.
| This module is available in several variants: |
|
Specifications1
Hardware release:Rev. D
Product ID:RX010V1C
Product name:Yocto-0-10V-Rx-C
USB connector:USB-C
Width:20mm
Length:60mm
Weight:10g
Channels:2
Refresh rate:50Hz
Input impedance:10KΩ
Measuring range:0...10V
Accuracy:0.1%
Resolution:0.001V
Protection class, according to IEC 61140:class III
USB isolation, dielectric strength:1kV
Normal operating temperature:5...40°C
Extended operating temperature2:-30...85°C
Supported Operating Systems:Windows (PC + IoT), Linux (Intel + ARM), macOS, Android
Drivers:Driverless, no driver needed
API / SDK / Libraries:C++ Obj-C C# VB.NET UWP Delphi Python Java Android LabVIEW
API / SDK / Libraries (TCP only):Javascript Node.js PHP
RoHS compliance:RoHS III (2011/65/UE+2015/863)
Suggested enclosure:YoctoBox-Long-Thick-Black-Vents
Harmonized tariff code:9032.9000
Made in:Switzerland
Accessories and related products
Related articles and application examples
Downloads
