The Yocto-milliVolt-Rx-C device is a high accuracy USB voltmeter. It lets you measure by USB very small voltages (down to a few dozen of microVolts, and up to 2V max), even when they are generated by extremely weak sources (very high impedance).
Typical applications include measurement of electro-chemical reactions (e.g. pH and redox probes), low-voltage sensors (e.g. gaz sensors, etc), or Wheatstone bridges (e.g. load cells, etc). It is also possible to use this device to accurately measure the voltage drop across a shunt to measure high currents.
The input circuit of this device uses a very low bias current amplifier (typ. 0.2 pA). The measure circuit is electrically isolated from the USB bus, which makes it possible to measure grounded voltages without risk of creating a ground loop.
For measuring the weakest signals (e.g. pH measurements), we recommend to use the BNC variant of this product, which features a BNC connector to use with coaxial cable, to avoid electromagnetic interference.
This module is the equivalent of the Yocto-milliVolt-Rx, but with a USB type-C connector. Both versions can be connected to a USB A, Type C or Micro-B host with the appropriate cable.
This device can be connected directly to an Ethernet network using a YoctoHub-Ethernet, to a WiFi network using a YoctoHub-Wireless-n and to a GSM network using a YoctoHub-GSM.
USB cables and enclosures to be ordered separately.
| This module is available in several variants: |
|
| This product is not available anymore. |
Specifications1
Hardware release:Rev. D
Product ID:RXMVLT1C
Product name:Yocto-milliVolt-Rx-C
USB connector:USB-C
Width:20mm
Length:45mm
Weight:6g
Channels:1
Input bias current (typ.):< 1pA
Refresh rate:100Hz
Input impedance:> 1000GΩ
Measuring range:-1000 ... +2000mV
Accuracy:0.1%
Sensitivity:0.01mV
Protection class, according to IEC 61140:class III
USB isolation, dielectric strength:1kV
Normal operating temperature:5...40°C
Extended operating temperature2:-30...85°C
Supported Operating Systems:Windows (PC + IoT), Linux (Intel + ARM), macOS, Android
Drivers:Driverless, no driver needed
API / SDK / Libraries:C++ Obj-C C# VB.NET UWP Delphi Python Java Android LabVIEW
API / SDK / Libraries (TCP only):Javascript Node.js PHP
RoHS compliance:RoHS III (2011/65/UE+2015/863)
Suggested enclosure:YoctoBox-Short-Thick-Black
Harmonized tariff code:9032.9000
Made in:Switzerland
Accessories and related products
Related articles and application examples
Downloads
