The Yocto-Servo device lets your software drive up to 5 RC servo-motors through a standard USB interface.
This device handles two power sources for the servo-motors. For low-power applications, the servo-motors can be powered directly from the USB bus. For higher loads, use the external power connection provided on the device. The switch from one power source to the other is automatic, but can be controlled by software.
This device can be connected directly to an Ethernet network using a YoctoHub-Ethernet, to a WiFi network using a YoctoHub-Wireless-n and to a GSM network using a YoctoHub-GSM.
USB cables and enclosures to be ordered separately.
I see where the YoctoServo is supported in Artisan-Scope -
I'm attempting to get Artisan-Scope to see/move an RC Servo (works in VirtualHub) and cant figure out how to address the YoctoServo with Artisan-Scope using the RC Command API used in Artisan Events.
This post has more info -
Any assistance would be appreciated. Thank you!
With some kind help from an Artisan Engineer I was able to figure it out. The post above has the details and I hope it helps someone!