This enclosure will dress up and protect your precious Yocto-Device. It is made of two parts: a base and a lid, which are tightly assembled with screws and nuts.

There are many ways to fix this enclosure: it has legs which can be removed if needed, you can also stick it on a plane surface using the included adhesive. Built-in magnets will hold it on metallic surfaces.

For orders of 9 or more enclosures of the same height, you can send us by e-mail your own custom logo to engrave on the lid instead of the Yoctopuce logo.

This enclosure is meant to be used with Yoctopuce modules with a detachable led or sensor part. There is no cut on the top of the transparent lid. This enclosure is intended to be used for products such as Yocto-Color and Yocto-Light. The base is made of black plastic. Please note: the sensor can only fit in the enclosure when soldered directly to the ribbon cable (the Picoflex connector does not fit in the enclosure).

Please note: Starting in fall 2017, we will replace by default all metal screw and bolts with similar plastic screw, to improve the insulation of electrical sensors. If you nevertheless prefer to receive the metal screw as in the past, simply mention it to us when you place your order.

This product is not available anymore.


Product name:YoctoBox-Sensor-Black
Harmonized tariff code:3923.1000
Made in:France

Related articles and application examples


User manual (HTML)
User manual (PDF)

Add a comment 2 comments

1 - ultrasonix Friday,may 09,2014 14H25

when could I buy 4 of these guys I would like to see what they look like on the front of a control panel with LEDs in as I was trying to squeeze your remote boards into standard Round Panel lamp housings.

2 - martinm (Yocto-Team)Friday,may 09,2014 16H18

Unless you really need a really huge quantity (>1000 units) I'm afraid you'll have to use the clear version: the black bases for sensor enclosure were never produced.

May I ask how you found that page ? it is not supposed to be public :-)

Yoctopuce, get your stuff connected.