Yocto-thermistor-c

Yocto-Thermistor-C

   

The Yocto-Thermistor-C is an USB interface for NTC and PTC thermistors. It can measure up to six temperature points. Each of the six channels can be configured independently thanks to tables or reference temperatures and β coefficients. The Yocto-Thermistor-C is an isolated device: there is an electric isolation between the sensor part and the USB part.

The Yocto-Thermistor-C is shipped with six tiny NTC thermistors connected to a 10 centimeter wire. You can extend them with any regular electric wire.

All six channels share one contact allowing the use of a bigger terminal and bigger wire (26-16 AWG). If you wish to connect the thermistors in a independent manner, choose the Yocto-MaxiThermistor.

The Yocto-Thermistor-C can also be used as a multichannel ohm-meter.

This device can be connected directly to an Ethernet network using a YoctoHub-Ethernet, to a WiFi network using a YoctoHub-Wireless-n and to a GSM network using a YoctoHub-GSM.

Yocto-Thermistor-C 6 thermistors are included Enclosure to be ordered separately

USB cables and enclosures to be ordered separately.

CHF 102.15

   Add to cart

Specifications

Product ID:THRMSTR1
Product name:Yocto-Thermistor-C
USB connector:micro-B
Width:58mm
Length:50mm
Weight:17g
Channels:6
Refresh rate:1Hz
Measuring range:100Ω...500KΩ
Accuracy (Ω) between 1KΩ...10KΩ:~0.1%
Accuracy, typical (Ω):1%
Protection class, according to IEC 61140:class III
USB isolation, dielectric strength (1 min.):31.5
Normal operating temperature:5...40°C
Extended operating temperature1:-30...85°C
Supported Operating Systems:Windows (PC + IoT), Linux (Intel + ARM), macOS, Android
Drivers:Driverless, no driver needed
API / SDK / Libraries:C++ Obj-C C# VB.NET UWP Delphi Python Java Android LabVIEW
API / SDK / Libraries (TCP only):Javascript Node.js PHP
RoHS compliance:RoHS III (2011/65/UE+2015/863)
Suggested enclosure:YoctoBox-MaxiIO-Transp
Harmonized tariff code:9032.9000
Made in:Switzerland


1 The extended temperature range is defined based on components specifications and has been tested during a limited duration (1h). When using the device in harsh environments for a long period of time, we strongly advise to run extensive tests before going to production.

Accessories and related products

YoctoBox-MaxiIO-Transp, Clear plastic enclosure for the Yocto-Maxi-IOUSB-A-MicroB-50, USB 2.0 type A to Micro-B data cable, 50 cm

Related articles and application examples

Downloads

User manual (HTML)
User manual (PDF)
Product brief
Blueprints
3D file (STEP)
RoHS certificate
REACH certificate
Most recent firmware59272 (02/08/2024)
Programming libraries59526 (02/27/2024)
Command line API57762 (11/09/2023)
VirtualHub application59547 (02/28/2024)


Add a comment 2 comments


1 - liz Thursday,march 26,2020 9H23

Is it possible to connect six 2-wire PT100s to the Thermistor-C? And if so, would the accuracy of the temperature measurements be improved compared to the Murata thermistors which come with the device?

2 - mvuilleu (Yocto-Team)Friday,march 27,2020 16H17

@liz: This device is optimized to measure larger resistances, ideally around 10K. At around 100 Ohm, the precision will not be better than ~1%, which will not work well for measuring a Pt100 probe.

For Pt100, I really recommend using the Yocto-PT100, which supports 4-wire configuration and has a much higher precision.

Yoctopuce, get your stuff connected.