Using a Pitot probe with a Yocto-0-10V-Rx

By seb, in Measures, august 11,2017.

A few years ago, we explained how to create an anemometer, but there is another solution to measure wind speed: the Pitot tube. This week, we are going to see how to measure wind speed with a Pitot tube for scaled modelling and a Yocto-0-10V-Rx.

New product: the Yocto-0-10-Tx

By mvuilleu, in New stuff, august 04,2017.

It took us some time to find a design that suited us, but this week we can finally announce the latest member of our family of USB analog interfaces: Here is the Yocto-0-10V-Tx.

DIY RGB LED bar lamp

By martinm, in DIY and Internet of Things, july 28,2017.

This week, we show you how to build a bar lamp based on RGB LEDs. It's easy and you will end up with something almost as pretty as those you may find in your favorite appliance store. Moreover, each LEDs can be controlled individually, which is not a common feature among design lamps.

How to detect leaks in an irrigation circuit

By mvuilleu, in DIY and Measures, july 21,2017.

Irrigation controllers are very convenient to avoid the garden watering chore, but they sometimes create disasters. As times goes by, and with changes in temperature, pipes tend to unbend and sometimes to separate at the joints, creating local inundations which can be devastating the vegetable patch, for example. Let's see how to detect leaks as quickly as possible...

Using the HTTP callback mode in PHP

By seb, in For the beginners, july 14,2017.

A few weeks ago, we explained how to use our modules with PHP. At the time, we explained how to use PHP in direct mode, but there is another way: the HTTP callback mode. This week, we are going to tell you how to write your first PHP script working in HTTP callback mode.