Combine a Yocto-GPS with a YoctoHub-Ethernet to get an autonomous appliance with built-in network connectivity:
The Yocto-GPS device is a 32 channels receiver for GNSS signals emitted by GPS and GLONASS satellites, that makes it possible to determine the position of the receiver, its speed as well as the current time. The latitude and the longitude at any time can be recorded on the internal flash memory, in order to build a data history that can be retrieved later on over USB.
The device can provide its positioning data at 10Hz, with a resolution of 10-6 degrees, eg. 10cm approximately. The absolute precision expected with clear satellite view is about 1.5m.
View product page
The YoctoHub-Ethernet is a Fast-Ethernet module that can host three Yoctopuce modules to access them remotely. It can be powered either by a USB Micro-B cable, or directly from the Ethernet cable (PoE compatible with 802.3af standard).
Three Yoctopuce modules can be connected directly, one of which can be fixed directly on the YoctoHub-Ethernet and connected using a Board2Board-127 connector. More devices can be connected thanks to the YoctoHub-Shield extension. The YoctoHub-Ethernet can power Yoctopuce devices up to 2A.
Hello, great product, I will be ordering shortly.
Can you please confirm if the antenna is including and what the maximum height this unit will operate at?
The Yocto-GPS has pretty standard limitations: it will lose track if any of the following limits are exceeded:
- ITAR limits: velocity greater than 515 m/s AND altitude above 18,000 m
- altitude: 100,000 m (max) or -1500 m (min)
- velocity: 600 m/s (max)
- acceleration: 2 G (max)
Contrarily to what has been previously written, it DOES properly report altitudes above 1000m.
And yes, the small antenna shown on pictures is included.