Combine a Yocto-Amp with a YoctoHub-GSM-3G-EU to get an autonomous appliance with built-in network connectivity:
This device is a digital USB ammeter that allows you to measure current automatically. It can provide quite precises digital measures (2 mA, 1%). It works with direct current (DC) as well as alternating current (AC) for which it provides the RMS value (5 mA or 3%).
This device is isolated, which means that the sensing part is electrically disconnected from the USB part: you can measure any current including from the mains, without risk of frying your computer.
View product page
The YoctoHub-GSM-3G-EU is a wireless-enabled module that can host three Yoctopuce modules to access them remotely through a 3G GSM cellular network (UMTS and HSPA). It can be powered either by a USB Micro-B cable and a regular phone charger, or a 5V battery pack.
The radio module supports the two GSM frequency bands 900 MHz and 1800 MHz used in Europa, Middle-East, Africa, Asia and Pacific. For a detailed list of frequency bands supported in each country, please refer to the Wikipedia page GSM_frequency_bands.
How can this unit be used to measure higher amperage than 10A? Is it possible to measure 20-50A DC (~15v)?
@evansharp: No, but you can use a Yocto-milliVolt-Rx with a external shunt. See: www.yoctopuce.com/EN/article/transforming-the-yocto-millivolt-rx-into-a-usb-ammeter