Yocto-rs232 wireless-g

Yocto-RS232 Wireless-g


Combine a Yocto-RS232 with a YoctoHub-Wireless-g to get an autonomous appliance with built-in network connectivity:



This device is a USB to RS232 adapter, that does not require a driver and does not install a virtual COM port.

It is able to autonomously interpret serial data coming from any RS232 appliance and expose measures as if they would come from a Yoctopuce sensor, with all inherent advantages: unique identifier, polling, callbacks, datalogger. Be aware that this device will not work with applications designed to use a COM port: it is designed to be used with Yoctopuce API only.

View product page

The YoctoHub-Wireless-g is a wireless-enabled module that can host three Yoctopuce modules to access them remotely through a Wifi network (802.11g). It can be powered either by a USB Micro-B cable and a regular phone charger, or a 5V battery pack.

Three Yoctopuce modules can be connected directly, one of which can be fixed directly on the YoctoHub-Wireless-g and connected using a Board2Board-127 connector. More devices can be connected, thanks to the YoctoHub-Shield extension. The YoctoHub-Wireless-g can power Yoctopuce devices up to 2A.

View product page

   Add to cart


Part Number:RS232MK1
Product name:Yocto-RS232
USB connectormicro-B
Max frequency115200bps
USB bus insulation1kV
Normal operating temperature5...40░C
Extended operating temperature-25...85░C
Supported Operating SystemsWindows (PC + IoT), Linux (Intel + ARM), macOS, Android
Driversno driver needed
API / SDK / Libraries (USB+TCP)C++, Objective-C, C#, VB.NET, UWP, Delphi, Python, Java, Android
API / SDK / Libraries (TCP only)Javascript, Node.js, PHP
Made inSwitzerland

Add a comment 2 comments

1 - till.eulenspiegel Friday,june 09,2017 7H51


I would please need a little help here.
We have a old but reliable gas-measuringdevice which puts out a data string like this:

00 00 00 66 00 00 00 66 C8
19 01 00 67 00 00 00 81 C8
2E 01 00 66 00 00 00 95 C8

The first byte is the base of the measured Value and the second byte is the exponent of the measured Value. Ist it possible to store the Value in one genericSensor (Base and exponent calculated)?

thanks for the help.


2 - mvuilleu (Yocto-Team)Friday,june 09,2017 11H50

@till We can certainly find a solution. Please reach out to support by mail, and let us know if this output is in ASCII form or in binary form. If you have the datasheet of the sensor, that would also help.

Yoctopuce, get your stuff connected.