Yocto-pwm-rx gsm-3g-eu

Yocto-PWM-Rx GSM-3G-EU

   

Combine a Yocto-PWM-Rx with a YoctoHub-GSM-3G-EU to get an autonomous appliance with built-in network connectivity:

Yocto-PWM-Rx

YoctoHub-GSM-3G-EU

The Yocto-PWM-Rx is a 2 channels PWM input. Each channel can report frequency, duty cycle, and pulse length. It works from 0.05Hz to 250Khz and accepts any -30..+30V signal as long as it crosses the 0.7V threshold.

Each channel also features a pulse counter linked to a time counter. This allows to integrate over time the output of sensors such as flow-meters. The pulse counter works from 0 to 250kHz.

View product page

The YoctoHub-GSM-3G-EU is a wireless-enabled module that can host three Yoctopuce modules to access them remotely through a 3G GSM cellular network (UMTS and HSPA). It can be powered either by a USB Micro-B cable and a regular phone charger, or a 5V battery pack.

The radio module supports the two GSM frequency bands 900 MHz and 1800 MHz used in Europa, Middle-East, Africa, Asia and Pacific. For a detailed list of frequency bands supported in each country, please refer to the Wikipedia page GSM_frequency_bands.

View product page

Yocto-PWM-Rx
YoctoHub-GSM-3G-EU
HubConnectionKit
Total:
   Add to cart

Specifications

Manufacturer Product NumberYPWMRX01
Product name:Yocto-PWM-Rx
USB connectormicro-B
Channels2
Frequency0.05 ... 250'000Hz
Refresh rate50Hz
Input impedance110KΩ
Threshold voltage0.7V
Max voltage-30 ... +30V
Supported Operating SystemsWindows, Linux (Intel + ARM), Mac OS X, Android
Driversno driver needed
API / SDK / Libraries (USB+TCP)C++, Objective-C, C#, VB .NET, Delphi, Python, Java/Android
API / SDK / Libraries (TCP only)Javascript, Node.js, PHP, Java
RoHSyes
Made inSwitzerland



Add a comment 2 comments


1 - cjw Sunday,march 12,2017 9H39

I'd like to change the frequency Hz value to CPS (Counts per Second). I'd also like change the reported edge count to a singular event per pulse (1/2 value). How do I do this ?

Is there a way of simple doing this without digging to far into the APIs?


2 - martinm (Yocto-Team)Monday,march 13,2017 6H42

@cjw: The unit is hard-coded into the device and cannot be modified. The events count is done in hardware, and this hardware cannot tell the difference between up and down transitions, that's why the device reports edges count, not pulses count.

Yoctopuce, get your stuff connected.