Combine a Yocto-4-20mA-Rx with a YoctoHub-Ethernet to get an autonomous appliance with built-in network connectivity:
The Yocto-4-20mA-Rx device will let you read the instant value returned by any industrial sensor following the 4-20mA standard, as well as record the measures on its internal flash for later retrieval when connected again. The device can automatically map the current reading to a physical measure by applying a proportional rule. The module features two inputs, to connect two independent sensors.
You can find sensors for all kind of physical measures using the standard 4-20mA interface. Transmitting the measure using a 4-20mA current loop makes it possible to get a very precise reading (up to 0.01%), and works even when the sensor is far away from the interface module (several thousands of meters of cable away).
View product page
The YoctoHub-Ethernet is a Fast-Ethernet module that can host three Yoctopuce modules to access them remotely. It can be powered either by a USB Micro-B cable, or directly from the Ethernet cable (PoE compatible with 802.3af standard).
Three Yoctopuce modules can be connected directly, one of which can be fixed directly on the YoctoHub-Ethernet and connected using a Board2Board-127 connector. More devices can be connected thanks to the YoctoHub-Shield extension. The YoctoHub-Ethernet can power Yoctopuce devices up to 2A.
Is the sensor able to measure values between 0 and 4 mA?
@stefan: yes, you can use the whole range 0-20mA if you want, this is a configuration option
Thank you very much!
We are thinking about extending our data logger software with support for this device.
If I understood the license terms of your C++ library correctly, it is allowed to embed and distribute your library into (resp. as part of) standard software tools developed by our company. Only executables or libraries are distributed, the source code of the product will not disclosed.
Please confirm if this is OK or let me know a suitable contact on your side to clarify details.
@guenter Yes, this makes no problem: as long as the purpose of integrating our library is to use our devices, you can distribute it the way you want. There is no GPL code in our library.